|
|
|
|
|
QUALITY DOCUMENTS |
1-Affidavit of Conformance
(Vendor Certificate)
RKB Rolling Bearing
On behalf of the manufacturers,
that here we represent, it is
stated that the rolling bearing
we supply with RKB-J brand are
and will be produced as per the
applied specifications in
conformity with the purchasing
orders and with the technical
data that are referred to the
related catalogues.
.Dimensions :as per ISO
standards as here below stated:
-deep groove radial ball
bearings :ISO 15/1981
-thrust ball bearings :ISO
104/1979 and DIN 71/715
-tapered roller bearings :ISO
355/1977
-cylindrical roller bearings :ISO
15/1981
-spherical roller bearings :ISO
15/1981
.Materials of rings and rolling
parts :
-bearing steel JIS-SUJ2/SAE
52100/DIN 100CR6 with quality
specifications as per
ASTM-A295 and surface hardness
as per ASTM-E19
.Tolerance :ISO 1132/1982 for
the designations and ISO 49 for
the classes.
.Internal clearances: as per
standards ISO 5753/1981 and
DIN620 /part 4.
.Load ratings : calculated
following the instructions of
ISO 281 (dynamic values) and ISO
76 (static values) with the
extended magnitude of the rating
life as per ISO 291 and updated
modified factors
.It is integrated part of this
document the certificate RKB-J
4546885 Japan.
2-Certicate of Trade
Registration
Registration Nr:4546885
The Mark :RKB-J
Group 7 :Bearings and
transmission parts –General
Mechanics
Group 12: Bearings and
transmission parts –Naval and
Aeronautical
Owner of trade right :Akiyama
CO. 5-8-13 Okayama, Japan
Application number :2000-142312
Filing date :December 21,2000
This is certify that the trade
is registered on the register of
the Japan Patent Office
Commissioner, Japan patent
office, Kozo Oikawa
3-ISO Certificate of
Registration, ISO 9001:2000
Date of issue :May 30,2005
Valid until :May 29, 2008
4-Certificate of Approval, ISO
9001:2000, GB/T 19001-2000
Issued by UKAS Quality
Management
Original approval :6th April
2005
Certificate Expiry :5th April
2008
5-Certificate of Approval, ISO
14001:2004, GB/T 24001-2004
Issued by UKAS Quality
Management
Original approval :19th March
2006
Certificate Expiry :18th March
2009
|
|
|
|
